Central vacuum system for workshops and production

Focus on sustainability and minimal environmental impact

Central vacuum cleaning systems in production companies provide a healthier working environment and more efficient production.

If you run a manufacturing company or workshop, it is almost certain that you have challenges with dust and residual materials from production. Many companies are not aware that the Danish Labour Inspectorate monitors how much employees are exposed to dust, and this can result in an injunction if the dust is not handled correctly.

At Technor, we specialize in central vacuum systems, also called high-vacuum systems, for manufacturing companies, industry and workshops, and we advise, install and service the systems so that they are set up correctly and with the greatest possible utilization for you. Contact us and hear more about how we can help you with a central vacuum system.

A regular vacuum cleaner is not enough

We hear about many companies that use ordinary vacuum cleaners to remove dust. The problem with this is that an ordinary vacuum cleaner recirculates the air rather than cleaning it. With a central vacuum cleaner that is made for industry and production, you are sure that optimal conditions are created in the workplace for employees. The central vacuum cleaner system has a powerful suction that effectively cleans both during and after production. This can be, for example, in brickworks, in the food industry, the pharmaceutical industry, the wood industry or the mineral industry, where there may also be a risk of explosive dust (ATEX).

See our references

Contact us

Would you like to hear more about the solutions we offer within fire protection of ventilation systems, or would you like a quote for a specific task? Contact us via the contact form below - and we will get back to you as soon as possible.

Ventilation industry form

Central vacuum systems tailored to your production

With many years of experience in the industry, we know that no two productions work the same. That's why we would like to see your production before we make an offer for a central vacuum system.

We are not only suppliers of the systems, but also advisors who guide and tailor a solution that suits you, so that we ensure a healthier and better working environment and at the same time correct handling of the residual material across the board. When we come to visit, we can also assess where the system is most strategically placed in relation to the working conditions and workflows. Technor's systems are also flexible, which means that we have a lot of parameters to adjust in order to have the system specially adapted to your production.

A vacuum cleaner system from Technor is of very high quality. We have carefully selected the suppliers of the parts for the system because we want to deliver a product that is both robust, safe, energy-optimized and has a long lifespan.

Better waste material management in production and workshops

One of the biggest advantages of a central vacuum system is the controlled handling of residual materials after production, as the residual material ends up in one place. We adapt the system depending on whether the material is to end up in a container, buckets or bags, and whether it is to be emptied manually or with, for example, a forklift. By collecting all the residual material in one place, the employee who has to dispose of the material is exposed to the dust as little as possible.

Tailored service agreement for central vacuum cleaning system

When you receive a central vacuum system from Technor, we also offer to provide service on the systems afterwards. Central vacuum systems need, among other things, filter changes and a general review of the parts. For example, if you use the vacuum system for the production of something that causes a lot of wear on the system, there will eventually be parts that need to be replaced in order for you to get the best out of it.

Just like our systems, our service agreements are also tailored to your production. Some productions will need service frequently, while others can do with fewer visits.

Advantages of a central vacuum cleaner system

There are many advantages to investing in a central vacuum system, or a high-vacuum system, in production.

You will:

Comply with the regulations on handling dust from the Danish Occupational Health and Safety Authority.
get better and legal handling of residual materials, as all the residual material is collected in one place, which must be emptied and maintained.
ensure a longer lifespan for the machines you use in production, as regular and thorough cleaning and vacuuming of the machines minimizes wear and tear on them.
ensure a healthier working environment for employees, as the air is cleaned and there is no dust in the production area that swirls up.
get nicer work areas in production or in the workshop.
Minimize noise nuisance from vacuuming and cleaning the machines and thereby achieve a better working environment.

Fire protection in connection with ATEX

Fire protection and ATEX are inextricably linked. ATEX stands for explosive atmosphere and refers to the explosion hazard that occurs when dust is stirred up and mixed with air. If a spark is lit near this mixture, there is a risk that it will ignite.

When working in explosive environments, an ATEX ventilation system must be installed to remove dust from the air. This is a way to reduce the risk of fire and explosion and should be considered when working with fire safety.

35 years of experience in the industry

We have more than 35 years of experience in the ventilation and extraction industry, which is your guarantee that your system will be assembled and installed correctly. We also follow technological developments so that we can offer innovative, modern and energy-efficient solutions that are suitable for both new and older buildings.

Should your new central vacuum system be delivered by us?

Contact us and find out more about the possibility of having a central vacuum system delivered by us. You can also read more about the vacuum solutions we have already delivered to some of our customers.

We can of course also help with tailored ventilation solutions that match your needs.